AP 7131 Wireless Access Point
The tri-radio 802.11a/b/g/n AP-7131 offers an unparalleled combination of features that re-define the standard for access points.
The AP 7131 802.11n Wireless Access Point delivers the throughput, coverage and resiliency required to build an all-wireless enterprise. The tri-radio design provides simultaneous support for high-speed wireless voice and data services, self-healing mesh networking and non-data applications such as Motorola’s Wireless IPS. The fully DFS-compliant 802.11n Draft 2.0 device offers speeds up to 600 Mbps per access point — six times the bandwidth of an 802.11a/g access point. And Adaptive AP provides unparalleled resiliency and flexibility, enabling the AP 7131 to be deployed as either a stand-alone wireless access point or adopted by a Motorola wireless switch for centralized configuration and management.
Conducted transmit power of 27.7dBm and superior receive sensitivity provide best in class range, coverage and application performance, even in harsh RF conditions
Delivers maximum wireless network throughput to support virtually any enterprise application, including voice and video
The ability to dedicate multiple radios to multiple functions increases security without increasing costs; band-unlocked radios enable 24x7 dual band Wireless IPS sensing on both 2.4GHz and 5GHz with concurrent 802.11a/b/g/n client access and mesh
Around the clock network protection through instant rogue detection
The ability to place a remote AP-7131 in Spectrum Analysis mode allows remote identification of local RF interference, enabling remote troubleshooting and issue resolution from the Network Operation Center (NOC) or other centralized location
Enables centralized management of mesh access points at remote sites including automatic firmware upgrades; provides site survivability for remote locations with 802.11a/b/g/n networks for unparalleled resiliency
Standard Power-over-Ethernet (PoE) provides power for both radios; intelligent power management enables self-configuration based on available power; eliminates the need to upgrade the PoE infrastructure
Eliminates need to purchase and manage additional equipment; simplifies provisioning of network services and public access
Allows wireless extension of existing wired or wireless networks in remote or outdoor locations
End-to-end enterprise class wired and wireless security
• 3X3 MIMO with 2 Spatial Streams
• 20 MHz and 40 MHz Channels
• 300 Mbps Data Rates per Radio
• Packet Aggregation
(AMSDU, AMPDU)
• Reduced Interframe Spacing
• 802.11 DFS
• MIMO Power Save
(Static and Dynamic)
Dimensions:
AP 7131: 5.50 in. L x 8.00 in. W x 1.10 in. H
13.97 cm L x 20.32 cm W x 2.79 cm H
AP 7131N: 5.50 in. L x 8.00 in. W x 1.5 in. H
13.97 cm L x 20.32 cm W x 3.81 cm H
Weight:
AP 7131: 2.33 lbs/1.06 kg
AP 7131N: 2.67 lbs/1.21 kg
Housing:
Metal, plenum-rated housing (UL2043)
Available mounting:
No additional hardware required to mount
Configurations:
Above drop ceiling, under ceiling or on wall
LEDs:
6 top mounted LEDs, 1 bottom mounted LED, with
multiple modes indicating 802.11a/g/n activity, power, Ethernet adoption, Wireless IPS and errors
Uplink:
2 ports (GE1, GE2) Auto-sensing 10/100/1000
Base-T Ethernet; 802.3af on GE1 LAN port
Antenna connectors:
RP-SMA
Console port:
RJ45 Console Port
Operating Temperature:
-4°F to 122°F/-20°C to 50°C
Storage Temperature:
-40°F to 158°F/-40°C to 70°C
Operating humidity:
5 to 95% RH non-condensing
Operating altitude:
8000 ft./2438 m @ 82°F/28°C
Storage altitude:
15000 ft./4572 m @ 53°F/12°C
Electrostatic discharge:
15kV air, 8kV contact
Operating voltage:
36-57VDC
Operating current:
Not to exceed 600mA @ 48VDC
Integrated PoE support:
802.3af support for dual radios, 802.3at (draft)
Layer 2 and Layer 3:
Layer 3 routing, 802.1q, DynDNS, DHCP server/client, BOOTP client, PPPoE, and LLDP
Security:
Stateful Firewall, IP filtering, NAT, 802.1x, 802.11i, WPA2, WPA Triple-Methodology
Rogue Detection: 24x7 dual-band WIPS sensing, MU-assisted, on-board IDS and secure guest access (HotSpot)
Quality of Service (QoS):
WMM, WMM-UAPSD, 802.1p, Diffserv and TOS
Wireless medium:
Direct Sequence Spread Spectrum (DSSS), Orthogonal Frequency Division Multiplexing (OFDM) and Spatial multiplexing (MIMO)
Network standards:
IEEE 802.11a/b/g/n, 802.11d and 802.11i WPA2, WMM and WMM-UAPSD
Data rates supported:
802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48,
and 54Mbps
802.11a: 6,9,12,18,24,36,48, and 54Mbps
802.11n: MCS 0-15 up to 300Mbps
Operating channels:
All channels from 4920 MHz to 5825 MHz
Chan 1-13 (2412-2472 MHz)
Chan 14 (2484 MHz) Japan only
Actual operating frequencies depend on regulatory rules and certification agency
AP 7131N AP 7131
Maximum available
transmit power per chain:
23 dBm 20 dBm
Maximum available transmit power per AP:
27.7 dBm 24.5 dBm
Antenna configuration:
3x3 MIMO (transmit/receive on all three antennas)
Transmit power adjustment:
1dB increments
Operating bands:
FCC EU Japan2.412 to 2.462 GHz 2.412 to 2.472 GHz 2.412 to 2.484GHz
5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz 4.900 to 5.000 GHz
5.250 to 5.350 (UNII -2) 5.250 to 5.350 GHz 5.150 to 5.250 GHz (W52)
5.470 to 5.725 (UNII -3) 5.470 to 5.725 GHz 5.250 to 5.350 GHz (W53)
5.725 to 5.850 (ISM) (Country Specific) 5.470 to 5.725 GHz (W56)
Product safety certifications:
UL / cUL 60950-1, IEC / EN60950-1, UL2043, RoHS
Radio approvals:
FCC (USA), Industry Canada, CE (Europe), TELEC
(Japan), China, Korea, Australia, Brazil
AP-7131N-66S70-WR
Tri-Radio 802.11n Adaptive Services Access Point, with QIG*
AP-7131N-66S78-WW
Tri-Radio 802.11n Adaptive Services Access Point,
6 element Façade antenna module, with QIG*
AP-7131N-66S70-US
Tri-Radio 802.11n Adaptive Services Access Point, with QIG
AP-7131N-66S78-US
Tri-Radio 802.11n Adaptive Services Access Point,
6 element Façade antenna module, with QIG
AP-7131N-66E40-WR
Dual Radio 802.11n Adaptive Services Access Point with integrated ExpressCard Slot, with QIG*
AP-7131N-66E48-WW
Dual Radio 802.11n Adaptive Services Access Point with integrated ExpressCard Slot, 6 element Façade antenna module, with QIG*
AP-7131N-66E40-US
Dual Radio 802.11n Adaptive Services Access Point with integrated ExpressCard Slot, with QIG
AP-7131N-66E48-US
Dual Radio 802.11n Adaptive Services Access Point with integrated ExpressCard Slot, 6 element Façade antenna module, with QIG
AP-7131-66040-WR
AP-7131 Dual Radio 802.11n Access Point, Plastic Façade, with QIG
AP-7131-66048-WR
APN Dual Radio 802.11n Access Point, 6 element
Façade antenna Module, with QIG
AP-7131-60020-WR
AP 7131 Single Radio 802.11n Access Point,
Plastic Façade, with QIG
AP-7131-60028-WR
AP 7131 Single Radio 802.11n Access Point,
6 element Façade antenna Module, with QIG
AP-7131-60020-D-WR
APN Single Radio 802.11n Access Point
Dependent Mode
AP-7131-66040-D-WR
APN Dual Radio 802.11n Access Point
Dependent Mode
SNB-7120FL-P-1
AP 7131 Single-Radio Remote 11n Sensor (external antenna) with Full WIPS license
SNB-7128FL-P-1
AP 7131 Single-Radio Remote 11n Sensor (integrated antenna) with Full WIPS license
SNB-7140FL-P-1
AP 7131 Dual-Radio Remote 11n Sensor (external antenna) with Full WIPS license
SNB-7148FL-P-1
AP 7131 Dual-Radio Remote 11n Sensor (integrated antenna) with Full WIPS license
50-14000-247R
AP 7131 Power Supply
AP-PSBIAS-1P3-AFR
Single Port High Power 802.3at (Draft)
Power Injector
ML-2452-PTA3M3-036
3 Port MIMO Antenna
ML-2452-PTA2M3X3-1
Façade with 6 element antenna Module
KT-135628-01
AP 7131 mounting kit (optional)
M25.90001.001
Plastic façade cover for AP 7131
Motorola AP7131 Broşür