AP 8132 Modular 802.11n Access Point
The AP 8132’s modular architecture is the ideal future-ready platform for deploying applications.
The AP 8132 goes beyond typical AP functionality and features. In addition to providing high-speed network access for customers and staff, its modular design also enables you to more efficiently deploy applications where they are most needed. By leveraging your wireless network, the AP 8132 lets you deploy these applications without the time, effort and cost of having to install additional hardware and cabling.
Delivers maximum throughput to support virtually any enterprise application, including voice and HD video
Simplifies and reduces total cost of installation using standard Power-over-Ethernet (PoE).
Allows for virtually unlimited possibilities for applications with its innovative design that accepts up to two module attachments, one on either side of the base.
Increases reliability and resilience of the wireless network to support mission critical applications.
Lets you increase security without increasing costs. Band-unlocked radios enable 24x7 dual band Wireless IPS sensing on both 2.4 GHz and 5 GHz with concurrent 802.11a/b/g/n client access and mesh.
• 3X3 MIMO with 3 Spatial Streams
• 20 MHz and 40 MHz Channels
• 450 Mbps Data Rates per Radio
• Packet Aggregation (AMSDU, AMPDU)
• Reduced Interface Spacing
• 802.11 DFS
• MIMO Power Save (Static and Dynamic)
• Advanced forward error correction coding: STBC, LDPC
• Dual-band 2x2 USB radio (to be released soon) on expansion port
for tri-radio operation
• Smart antenna features with transmit beamforming
Dimensions 9.0 in L x 6.0 in W x 1.625 in H
22.9 cm L x 15.2 cm W x 4.1 cm H
Weight 3.2 lbs/1.45 kg
Housing Metal, plenum-rated housing (UL2043)
Available mounting No additional hardware required to mount
Configurations Above drop ceiling, under ceiling or on wall
LEDs activity indication 2 top mounted LEDs, 2 bottom mounted LEDs
Uplink 2 ports (GE1, GE2) Auto-sensing
10/100/1000Base-T Ethernet; 802.3at on
GE1 LAN port
Antenna connectors Six RP-SMAs
Console port RJ45 Console Port
Operating Temperature 32°F to 122°F/0°C to 50°C
Operating humidity 5 to 95% RH non-condensing
Electrostatic discharge 15kV air, 8kV contact
Operating voltage 36-57VDC
Operating current 270mA@48V in 802.3af mode,
438mA@48V in 802.3at mode, typical.
Integrated PoE support 802.3at, also allows for 802.3af modes
Aux power supply 30W (625mA@48V) DC auxiliary power supply
Layer 2 and Layer 3 Layer 3 routing, 802.1q, DynDNS, DHCP server/
client, BOOTP client, PPPoE, and LLDP
Security Stateful Firewall, IP filtering, NAT, 802.1x,
A2, WPA Triple-Methodology Rogue
Detection: 24x7 dual-band WIPS sensing,
MU-assisted, on-board IDS and secure guest
Quality of Service (QoS) WMM, WMM-UAPSD, 802.1p, Diffserv and TOS
Wireless medium Direct Sequence Spread Spectrum (DSSS),
Orthogonal Frequency Division Multiplexing
(OFDM) and Spatial multiplexing (MIMO)
Network standards IEEE 802.11a/b/g/n, 802.11d and 802.11i WPA2,
WMM and WMM-UAPSD
Data rates supported 802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48, and
54Mbps 802.11a: 6,9,12,18,24,36,48, and
54Mbps 802.11n: MCS 0-23 up to 450Mbps
Operating channels 2.4GHz band: channel 1 through channel 13;
5.2GHz band: channel 36 through channel 165.
(* channel availability depends on local
Maximum available transmit power per chain (conducted) 2.4GHz: 23dBm - 5.2GHz: 20dBm
Maximum available transmit power per (composite, 0dBi antenna): 2.4GHz: 27.7dBm - AP 5.2GHz: 24.7dBm
Antenna configuration 3x3 MIMO (transmit/receive on all three antennas)
and green mode (dynamical antenna selection).
Transmit power adjustment : 1dB increment from 0dBm to max.
Operating frequencies 2412 to 2472Mhz, 5180 to 5825 MHz
Product safety certifications : UL / cUL 60950-1, IEC / EN60950-1, UL2043, RoHS
Radio approvals FCC (USA), Industry Canada, CE (Europe), China, Australia
Sensor Radio Module part number : MOD-8132-6001S-WW